Description

Dlask 1911 Bobtail Mainspring Housing

Dlask 1911 Bobtail Mainspring Housing – Reduce the Bulk For Concealed Carry Guns. Eliminates the sharp profile at the rear of the grip that can print when carrying a concealed 1911 Auto. Reduces bulk without reducing magazine capacity or performance. Removes nearly 1/2″ of material from the butt while maintaining correct grip position. Will require modification of grip panels.

Installation Jig will give precise location of mainspring hole (Not included)

1911 PARTS LIST

[one_half]
1.     Frame
1a.   Slide Stop
1b.   Thumb Safety
1c.   Slide Stop Plunger
1d.   Thumb Safety/Slide Stop Spring
1e.   Safety Plunger
1f.    Plunger Tube
1g.   Hammer Pin
1h.   Grip Screw Escutcheon
1i.    Mainspring Housing Retainer Pin
1j.    Ejector, Extended
1k.   Disconnector
1l.    Sear
1m.  Magazine Catch
1n.   Magazine Catch Spring
1o.   Magazine Catch Lock
1p.   Regular Spur Hammer
1q.   Hammer Strut Pin
1r.   Hammer Strut
1s.   Trigger
1t.   Sear Spring
1u.   Grip Safety
1v.   Grip (L.H.)
1w.  Grip (R.H.)
1x.   Grip Screw
1y.   Sear Pin
1z.   Ejector Pin

[/one_half][one_half_last]

2.      Slide
2a.    Front Sight
2b.    Fixed Rear Sight
2c.    Firing Pin Spring
2d.   Firing Pin
2e.   Extractor
2f.     Firing Pin Stop
2g.   Recoil Spring Guide
2h.   Recoil Spring
2i.    Recoil Spring Plug
3.     Barrel
3a.   Barrel Link Pin
3b.   Barrel Link
3c.   Barrel Bushing
4.     Magazine
5.     Mainspring Housing
5a.   Locking Bolt
5b.   Mainspring Retainer
5c.   Mainspring
5d.   Mainspring Cap
5e.   Plunger
5f.   Plunger Spring

[/one_half_last]

Additional information