Dlask Arms Picatinny Rails for Ruger 10/22 Platform Rifles
DAR 22 & Ruger 10/22 Rails
DAR 22 & Ruger 10/22 Rails
$48.99
Dlask Arms Corp. DAR 22 & Ruger 10/22 reversible scope mount rails are made out of 6160-T6 Aluminum.
You can reverse the rails so it extends over the barrel or have it facing the other way to fit your scope were you want it.
You have 3 sizes to pick from ; 3/8" (low), 1/2" (medium), and 3/4" (tall) with a see through bottom.
The 3/4" allows you to see through the bottom, allowing you to use your factory sights with it.
When reversing the rails, no extra holes have to be drilled in the receiver, as the specific hole pattern in the rails takes care of that and makes it possible that it can be assembled in reverse.
Another unique feature of our design regards the optional extra strength and rigidity in holding the rail onto the receiver.
For this, your gunsmith will simply drill and tap 2 additional holes #6-48 tpi into your Ruger OEM receiver (this is not required in the case of our DAR-22 receiver, as it already has the extra holes).
Package includes 6 mounting screws to fit a standard Ruger brand receiver (but if you intend to use this rail on our DAR-22 receiver, we suggest you take advantage of the receiver's extra thick top and purchase the #6-48 tpi 5/16" screws from our on-line store because they are longer and they provide for a better engagement).
Use the following form below to email us regarding your questions or comments.
Canadian Company
Leave Feedback
Enter your feedback modal content here. (Text/HTML/Shortcodes accepted).
Share
Dlask Arms Corp.Rails for Ruger 10/22 Pattern Rifles
Dlask Arms Corp. DAR 22 & Ruger 10/22 reversible scope mount rails are made out of 6160-T6 Aluminum. They are Mil-Spec Type 3 hard black anodized. You can reverse the rails so it extends over the barrel or have it facing the other way to fit your scope were you want it. You have 3 sizes to pick from ; 3/8″ (low), 1/2″ (medium), and 3/4″ (tall) with a see through bottom. The 3/4″ allows you to see through the bottom, allowing you to use your factory sights with it. When reversing the rails, no extra holes have to be drilled in the receiver, as the specific hole pattern in the rails takes care of that and makes it possible that it can be assembled in reverse. Another unique feature of our design regards the optional extra strength and rigidity in holding the rail onto the receiver. For this, your gunsmith will simply drill and tap 2 additional holes #6-48 tpi into your Ruger OEM receiver (this is not required in the case of our DAR-22 receiver, as it already has the extra holes). Package includes 6 mounting screws to fit a standard Ruger brand receiver (but if you intend to use this rail on our DAR-22 receiver, we suggest you take advantage of the receiver’s extra thick top and purchase the #6-48 tpi 5/16″ screws from our on-line store because they are longer and they provide for a better engagement).
Dlask Arms Corp.
Canadian Company
