Rifle Parts

10-22 Extended Charging Handle and Spring Set

$54.99

10-22 Extended Charging Handle and Spring Set

$54.99

Add to cart
Dlask Arms Corp. is pleased to announce that we have now changed our guide rod to make it cycle smoother and easier to change the recoil springs. The set now comes with a KIDD brand polished guide rod and 3...

10/22 Hex Head Hold-Down Bolt (take down bolt)

$5.00

10/22 Hex Head Hold-Down Bolt (take down bolt)

$5.00

Add to cart
The Hex head hold down bolt is used in holding the action in the stock. It uses a 5/32" hex Allen wrench, the same size like the one used for the v-block screws. It improves the appearance of the gun...

Adjustable Gas Lock for M-14 or Norinco M-305

$129.99

Adjustable Gas Lock for M-14 or Norinco M-305

$129.99

Add to cart
The adjustable gas lock allows the gas tube to be assembled on the barrel / gas system at a desired torque without worrying about going out of alignment or leaving the gas cylinder loose. Because the adjustable gas lock is...

AR-15 80% Machining Jig

$149.99

AR-15 80% Machining Jig

$149.99

Add to cart
Made here in Canada and complete with all of the necessary hardware to assemble. These are based on the industry standard for AR-15 drill jigs but with a few added improvements.
Sale

AR-15 Barrel, 14.5", M4 Profile, Chrome Lined

$249.99 $279.99

AR-15 Barrel, 14.5", M4 Profile, Chrome Lined

$249.99

$279.99

Add to cart
AR-15 barrel, 14.5" length, M4 profile, 5.56 chamber. Made from 4140 chromoly steel •with a 1:7 twist. M4 feed ramps. Chrome lined bore. •The barrel is Phosphate coated and matte black in appearance. •Carbine length gas system •and 1/2" x...
Sale

AR-15 Barrel, 16", M4 Profile, Chrome Lined

$249.99 $279.99

AR-15 Barrel, 16", M4 Profile, Chrome Lined

$249.99

$279.99

Add to cart
AR-15 barrel, 16.5" length, M4 profile, 5.56 chamber. Made from 4140 chromoly steel •with a 1:9 twist. M4 feed ramps. Chrome lined bore. •The barrel is Phosphate coated and matte black in appearance. •Carbine length gas system •and 1/2" x...
Sale

AR-15 Complete Upper Receiver, 5.56 NATO, 16" Barrel, 1:9

$549.99 $599.99

AR-15 Complete Upper Receiver, 5.56 NATO, 16" Barrel, 1:9

$549.99

$599.99

Add to cart
What we just got in are a surplus run of complete AR-15 complete upper receivers. These are 100% Made-In-The-USA units and feature a 5.56 x 45mm chamber and 1:9 twist rate. Come complete with Mil-spec bolt, charging handle, dust cover...

AR-15 FAKE SUPPRESSOR SHROUD

$78.00

AR-15 FAKE SUPPRESSOR SHROUD

$78.00

Add to cart
AR-15 fake suppressor style barrel shroud with 1/2 inch x 28 thread. This shroud type suppressor slips over the end of any Mil-spec type barrel profile that is less than 0.750" in diameter. It gives the optical illusion of 'shortening'...

AR-15 Stripped Upper Receiver, Anodized

$89.99

AR-15 Stripped Upper Receiver, Anodized

$89.99

Add to cart
These are finished AR-15 stripped upper receivers that we have had anodized. Machined from quality Cerro Forge forgings these are proper mil-spec parts. Start your next AR-15 upper build the right way, the mil- spec way!  Proudly made in the...

AR-15 Stripped Upper Receiver, Non-Anodized

$79.99

AR-15 Stripped Upper Receiver, Non-Anodized

$79.99

Add to cart
These are finished AR-15 stripped upper receivers that have not been anodized. Ready for Cerakote or any other surface treatment you choose. Machined from quality Cerro Forge forgings these are proper mil-spec parts. Start your next AR-15 upper build the...

CZ 455/452 MAGAZINE, .22LR 10-ROUND STEEL

$54.99

CZ 455/452 MAGAZINE, .22LR 10-ROUND STEEL

$54.99

Add to cart
A standard factory CZ magazine made of steel for your favorite rifle. 10 Round capacity fits the CZ 452 & 455 rifles 22LR   Part number : 5133-1200-01ND

CZ 858 / VZ 58 Barrel Nut, MilSurp, New Old Stock

$12.00

CZ 858 / VZ 58 Barrel Nut, MilSurp, New Old Stock

$12.00

Add to cart
CZ 858 / VZ 58 Barrel nut. Czech military surplus. These are commonly dinged and dented from years of abuse so get a shiny new one while they last.